2、 Construction method of exterior wall putty powder

1、外墻膩?zhàn)臃凼褂脮r(shí)先加干凈水（一般水粉比為1：2~3），調制容器須干凈，用電動攪拌均勻后放置20分鐘，使產品中的高分子聚合物充分調和水化，然后再次攪拌均勻即可使用。

1. When using exterior wall putty powder, first add clean water (generally the water powder ratio is 1:2 ~ 3), and the preparation container must be clean. After evenly stirring with electric power, place it for 20 minutes to fully mix and hydrate the high molecular polymer in the product, and then stir it evenly again.

2、如果基面有裂縫和多孔時，應先用調勻的底灰膩?zhàn)訉⒘芽p或多孔批平；基面溫度過高，施工前應輕微潤濕表面，再用批嵌工具批刮。一般墻面需批二至三遍，要重復批刮時，須在前次涂層硬結后方可進行，批好后須72小時后方可進行各種涂料施工。

2. If there are cracks and holes on the base surface, the cracks or holes shall be leveled with evenly mixed bottom ash putty; If the base surface temperature is too high, the surface shall be slightly wetted before construction, and then scraped with batch embedding tools. Generally, the wall surface needs to be approved for two to three times. If it needs to be scraped repeatedly, it can only be carried out after the previous coating hardens. After approval, all kinds of coating construction can be carried out 72 hours.

3、本產品在通風、干燥、陰涼、密封處約可貯存12個月左右。

3. The product can be stored in a ventilated, dry, cool and sealed place for about 12 months.

三、外墻膩?zhàn)臃鄣淖⒁馐马?xiàng)

3、 Precautions for exterior wall putty powder

外墻膩?zhàn)臃鄣倪m宜施工溫度為5℃-30℃，外墻膩?zhàn)臃矍形鹪谟晏焓┕ぃ奶祉殱?rùn)水保養，冬天須防凍。

The suitable construction temperature of exterior wall putty powder is 5 ℃ - 30 ℃. Exterior wall putty powder shall not be constructed in rainy days. It shall be moistened and maintained in summer and antifreezed in winter.

本文的精彩內容由濟南膩?zhàn)臃?/a>提供知識提供，本網站還有很多的精彩內容，更多的內容您可以點擊進入：http://www.360orange.cn我們有專門的客服為您解答問題

The wonderful content of this article is provided by Jinan putty powder. There are many wonderful contents on this website. You can click to enter more contents: http://www.360orange.cn We have special customer service to answer your questions