如果我們根據抹面砂漿的使用部位和功能來進行劃分，可以將抹面砂漿分為普通的抹面砂漿、裝飾砂漿，以及一些特殊功能的抹面砂漿。下面跟著小編來了解濟南抹面砂漿的配合比以及檢測項目相關內容吧。

If we divide the plastering mortar according to the use position and function, we can divide the plastering mortar into ordinary plastering mortar, decorative mortar and some special function plastering mortar. Let's follow the Xiaobian to learn about the mix proportion of Jinan plastering mortar and the relevant contents of the test items.

抹面砂漿的配合比

Mix proportion of plastering mortar

一種是用于磚墻表面的一些抹面砂漿。這類抹面砂漿中石灰和沙子的比例是1:2到1:4之間。

One is some plastering mortar used for the surface of brick wall. The ratio of lime to sand in this type of plastering mortar is between 1:2 and 1:4.

二種是適用于一些干燥環境的墻體表面的抹面砂漿。這時它的材料比例是石灰，黏土，沙子的比例是1:1:4到1:1:8之間。

The second is the plastering mortar suitable for the wall surface in some dry environments. At this time, the proportion of lime, clay and sand is between 1:1:4 and 1:1:8.

三種是使用在一些不太潮濕的房間的墻面和天花的砂漿。此時的材料的比例是石灰比上石膏比上沙子的比例是1:0.6:2到1:1:3之間。

The third is the mortar used on the walls and ceilings of some rooms that are not too humid. The ratio of lime to gypsum to sand is 1:0.6:2 to 1:1:3.

四種是使用于一些特別潮濕的，像浴室、廚房等部位的墻面的抹面砂漿的材料比例是1:3到1:2.5。

The fourth is the plastering mortar used for the walls of some particularly humid places, such as bathrooms and kitchens. The material ratio is 1:3 to 1:2.5.

五種是用于普通的地面，頂板或者墻面的面層的抹面砂漿，它的材料比例是1:2到1:1.5。

The fifth type is the plastering mortar used for the surface course of ordinary ground, roof or wall, and its material ratio is 1:2 to 1:1.5.

抹面砂漿需要檢測的項目

Items to be tested for plastering mortar

成品的抹面砂漿，在出廠以后都會配有出廠的小票。小票上會寫明檢查的項目。而且抹面砂漿會有相應的檢測報告。通過這些我們都可以發現，抹面砂漿主要檢測的項包括：砂漿的稠度，砂漿的保水率，抗壓強度，拉伸粘接強度。

The finished plastering mortar will be provided with a factory receipt after delivery. The ticket will indicate the items to be inspected. And the plastering mortar will have corresponding test report. From these, we can find that the main test items of plastering mortar include: consistency of mortar, water retention rate of mortar, compressive strength and tensile bonding strength.

抹面砂漿針對以上的項目都需要進行檢測。檢測的要求是同一個生產廠家的，同一品種，同一等級，同一批號，且連續進場的砂漿。一般要求砂漿每50立方，做一個檢驗批，不足50立方時按照一個檢驗批來算。

Plastering mortar shall be tested for the above items. The testing requirements are the mortar of the same manufacturer, the same type, the same grade, the same batch number, and continuously mobilized. Generally, one inspection lot shall be made for every 50 cubic meters of mortar, and less than 50 cubic meters shall be counted as one inspection lot.

此外它的出廠檢驗包括初凝時間、抗壓強度、密度、稠度和收縮率。

In addition, its delivery inspection includes initial setting time, compressive strength, density, consistency and shrinkage.

要注意，抹面砂漿是為了后期裝飾使用的，所以都要求具有很好的和易性，這樣便于以后施工。二點就是要求有較高的黏結力，這樣砂漿層與基層粘接牢固，能保證長期的不開裂，或者是出現空鼓脫落。更多事項就來我們網站http://www.360orange.cn咨詢吧。

It should be noted that the plastering mortar is used for later decoration, so it is required to have good workability, which is convenient for later construction. The second point is that it is required to have a high adhesive force, so that the mortar layer and the base layer are firmly bonded, which can ensure long-term non cracking, or hollowing out. For more information, please visit our website http://www.360orange.cn Consult.