Putty powder construction process is a very sophisticated work, strictly speaking, it must go through three steps, you may feel troublesome, if you deepen understanding of the three processes of putty powder, you will find that in fact one of the three is indispensable.

膩子粉施工分三遍刮涂，詳細施工時分工人的手法不一定相同。

Putty powder construction is scratched and painted three times, and the workers'methods are not necessarily the same during detailed construction.

膩子粉施工遍，清算墻面（將墻面起皮及裂痕肅清潔凈，并用水泥砂漿補抹，將殘留灰渣鏟潔凈，然后將墻面掃凈），它起到的是粘接作用：讓膩子與墻面很好的粘接上，為下一步打下一個堅實的根底。遍作用很大，要特別留意：一定干透，越干越好，因有干透了才干到達以上的作用。遍的枯燥時間正常為24小時，但詳細時間因墻面狀況和氣候情況而變化。

Putty powder construction for the first time, clearing the wall (skin and cracks will be removed clean, and cement mortar patching, residual ash shovel clean, and then sweep the wall clean), it plays the role of bonding: putty and wall good bonding, laying a solid foundation for the next step. The first time plays a very important role, we should pay special attention to: must be thoroughly dry, the better, because there is a thorough ability to reach the above role. The first time of dryness is normally 24 hours, but the detailed time varies according to the wall condition and climate conditions.

膩子粉施工第二遍，進一步找平：遍干透后就能夠上第二遍膩子進一步刮平，第二遍膩子調兌不易過稀，膩子膏含水量不要過大，以保證第二遍膩子刮涂后的水份盡快被遍膩子吸收（收漿），水份減少后到一定水平后才能夠停止壓光。

Putty powder construction for the second time, further leveling: the first time after drying the putty can be further scraped on the second time, the second time putty mixing is not too thin, putty paste moisture content should not be too large, to ensure that the second time putty scraped after the moisture is absorbed as soon as possible by the first time putty (slurry), water reduced to a certain level before stopping pressing.

膩子粉施工第三遍，第三與第二遍相隔時間很短停止的（二帶三），第三遍主要是壓光，使膩子施工的后一個環節，膩子的施工的外表效果均在第三遍表現出來了。在第二遍刮涂后略微收漿緊接著刮涂第三遍，然后開端壓光，到達光亮、鞏固的效果，光亮與強度是并存的。

Putty powder construction for the third time, the third time and the second time interval very short stop (two belt three), the third time is mainly calendering, so that the last link of putty construction, putty construction of the appearance effect are shown in the third time. After the second scraping, the pulp is slightly closed, followed by the third scraping, and then the calendering is started to achieve the effect of brightness and consolidation. The brightness and intensity coexist.

膩子粉是一種經過廠家依照合理的配比加工而成的一種合適內外墻運用的裝飾資料，在目前來說運用的膩子粉多數指的是廢品膩子粉，不再是那種半廢品的資料，在運用時需求本人參加膠水等才能夠到達施工性的資料，說了這么多，那么膩子粉終究還需不需求參加膠水呢，下面由大明洋化工為大家說說。

Putty powder is a kind of decorative material which is processed by the manufacturer according to a reasonable proportion for the use of internal and external walls. At present, most of the putty powder used refers to waste putty powder, which is no longer the kind of semi-waste material. In the use of putty powder, I need to participate in glue and so on to reach the construction information. So much said, putty powder still needs not to participate in the end. Glue, the following by Daming Ocean Chemical Industry for you to say.

膩子粉假如是正軌廠家消費的，比方市面上比擬常見的品牌，本公司消費的膩子粉就是廢品膩子粉，這種膩子粉是直接能夠參加清水?dāng)嚢杵骄纯墒┕さ哪佔臃郏捎趶S家曾經依據合理的配比搭配在施工性上十分的好。

If putty powder is consumed by normal-track manufacturers, for example, compared with common brands on the market, the putty powder consumed by our company is waste putty powder. This putty powder is putty powder which can directly participate in the average construction of water mixing. Because the manufacturers used to match the putty powder according to reasonable proportions, it is very good in construction.

因而目前膩子粉來說，多數指的是廢品膩子粉，無需參加膠水的水性膩子粉資料，只需是正軌廠家消費的膩子粉都是沒問題的。

So at present, putty powder mostly refers to waste putty powder, water-borne putty powder materials that do not need to participate in glue, only putty powder consumed by normal track manufacturers is all right.